Fedora Core 3 Update: radvd-0.7.3-1_FC3
Summary
radvd is the router advertisement daemon for IPv6. It listens to router
solicitations and sends router advertisements as described in "Neighbor
Discovery for IP Version 6 (IPv6)" (RFC 2461). With these advertisements
hosts can automatically configure their addresses and some other
parameters. They also can choose a default router based on these
advertisements.
Install radvd if you are setting up IPv6 network and/or Mobile IPv6
services.
Upgrade to new upstream version 0.7.3 .
- Upgrade to radvd-0.7.3
- add execshield -fPIE / -pie compile / link options
* Mon Feb 21 2005 Pekka Savola
- 0.7.3.
* Mon Oct 28 2002 Pekka Savola
- 0.7.2.
* Tue May 7 2002 Pekka Savola
- remove '-g %{RADVD_GID}' when creating the user, which may be problematic
if the user didn't exist before.
* Fri Apr 12 2002 Bernhard Rosenkraenzer
- 0.7.1 (bugfix release, #61023), fixes:
- Check that forwarding is enabled when starting radvd
(helps avoid odd problems)
- Check configuration file permissions (note: in setuid operation, must not
be writable by the user.group)
- Cleanups and enhancements for radvdump
- Ensure NULL-termination with strncpy even with overlong strings
(non-criticals, but better safe than sorry)
- Update config.{guess,sub} to cope with some newer architectures
- Minor fixes and cleanups
* Mon Jan 14 2002 Pekka Savola
- 0.7.1.
* Wed Jan 9 2002 Tim Powers
- automated rebuild
* Tue Jan 8 2002 Pekka Savola
- Change 'reload' to signal HUP to radvd instead or restarting.
* Fri Dec 28 2001 Pekka Savola
- License unfortunately is BSD *with* advertising clause, so to be pedantic,
change License: to 'BSD-style'.
* Thu Nov 22 2001 Bernhard Rosenkraenzer
- 0.7.0
* Wed Nov 14 2001 Pekka Savola
- spec file cleanups
- update to 0.7.0.
* Mon Jul 9 2001 Bernhard Rosenkraenzer
- initial Red Hat Linux build
* Sun Jun 24 2001 Pekka Savola
- add a patch from USAGI for overflow, Copyright -> License.
* Wed Jun 20 2001 Pekka Savola
- use /sbin/service.
- update to 0.6.2pl4.
* Sat Apr 28 2001 Pekka Savola
- update to 0.6.2pl3.
* Wed Apr 11 2001 Pekka Savola
- update to 0.6.2pl2.
* Wed Apr 4 2001 Pekka Savola
- update to 0.62pl1. Bye bye patches!
- Require: initscripts (should really be with a version providing IPv6)
- clean up the init script, make condrestart work properly
- Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.
* Sun Apr 1 2001 Pekka Savola
- add patch to chroot (doesn't work well yet, as /proc is used directly)
- clean up droproot patch, drop the rights earlier; require user-writable
pidfile directory
- set up the pidfile directory at compile time.
* Sat Mar 31 2001 Pekka Savola
- add select/kill signals patch from Nathan Lutchansky
- add address syntax checked fix from Marko Myllynen
- add patch to check the pid file before fork.
- add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
default one.
- add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
- fix initscript NETWORKING_IPV6 check.
* Sun Mar 18 2001 Pekka Savola
- add droproot patch, change to nobody by default (should use radvd:radvd or
the like, really).
* Mon Mar 5 2001 Tim Powers
- applied patch supplied by Pekka Savola in #30508
- made changes to initscript as per Pekka's suggestions
* Thu Feb 15 2001 Tim Powers
- needed -D_GNU_SOURCE to build properly
* Tue Feb 6 2001 Tim Powers
- use %configure and %makeinstall, just glob the manpages, cleans
things up
- fixed initscript so that it can be internationalized in the future
* Fri Feb 2 2001 Pekka Savola
- Create a single package(source) for glibc21 and glibc22 (automatic
Requires can handle this just fine).
- use %{_mandir} and friends
- add more flesh to %doc
- streamline %config file %attrs
- streamline init.d file a bit:
* add a default chkconfig: (default to disable for security etc. reasons;
also, the default config isn't generic enough..)
* add reload/condrestart
* minor tweaks
* missing: localization support (initscripts-5.60)
- use %initdir macro
* Thu Feb 1 2001 Lars Fenneberg
- updated to new release 0.6.2
* Thu Feb 1 2001 Marko Myllynen
- initial version, radvd version 0.6.1
ae1847f087192da649ad90ff5d484e95 SRPMS/radvd-0.7.3-1_FC3.src.rpm
345449ba4cf8dfba84eae22b5d1f9911 x86_64/radvd-0.7.3-1_FC3.x86_64.rpm
90ffdb019516a0be1f1467babdfb927b x86_64/debug/radvd-debuginfo-0.7.3-1_FC3.x86_64.rpm
096cccff8319777bb5b0f8093990f8a3 i386/radvd-0.7.3-1_FC3.i386.rpm
80263573365f5d976744c46761647bb2 i386/debug/radvd-debuginfo-0.7.3-1_FC3.i386.rpm
This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command.
fedora-announce-list@redhat.com
http://www.redhat.com/mailman/listinfo/fedora-announce-list
FEDORA-2005-177 2005-02-25 Name : radvd Version : 0.7.3 Release : 1_FC3 Summary : A Router Advertisement daemon Description : radvd is the router advertisement daemon for IPv6. It listens to router solicitations and sends router advertisements as described in "Neighbor Discovery for IP Version 6 (IPv6)" (RFC 2461). With these advertisements hosts can automatically configure their addresses and some other parameters. They also can choose a default router based on these advertisements. Install radvd if you are setting up IPv6 network and/or Mobile IPv6 services. Upgrade to new upstream version 0.7.3 . - Upgrade to radvd-0.7.3 - add execshield -fPIE / -pie compile / link options * Mon Feb 21 2005 Pekka Savola 0.7.3-1 - 0.7.3. * Mon Oct 28 2002 Pekka Savola - 0.7.2. * Tue May 7 2002 Pekka Savola - remove '-g %{RADVD_GID}' when creating the user, which may be problematic if the user didn't exist before. * Fri Apr 12 2002 Bernhard Rosenkraenzer 0.7.1-1 - 0.7.1 (bugfix release, #61023), fixes: - Check that forwarding is enabled when starting radvd (helps avoid odd problems) - Check configuration file permissions (note: in setuid operation, must not be writable by the user.group) - Cleanups and enhancements for radvdump - Ensure NULL-termination with strncpy even with overlong strings (non-criticals, but better safe than sorry) - Update config.{guess,sub} to cope with some newer architectures - Minor fixes and cleanups * Mon Jan 14 2002 Pekka Savola - 0.7.1. * Wed Jan 9 2002 Tim Powers - automated rebuild * Tue Jan 8 2002 Pekka Savola - Change 'reload' to signal HUP to radvd instead or restarting. * Fri Dec 28 2001 Pekka Savola - License unfortunately is BSD *with* advertising clause, so to be pedantic, change License: to 'BSD-style'. * Thu Nov 22 2001 Bernhard Rosenkraenzer - 0.7.0 * Wed Nov 14 2001 Pekka Savola - spec file cleanups - update to 0.7.0. * Mon Jul 9 2001 Bernhard Rosenkraenzer - initial Red Hat Linux build * Sun Jun 24 2001 Pekka Savola - add a patch from USAGI for overflow, Copyright -> License. * Wed Jun 20 2001 Pekka Savola - use /sbin/service. - update to 0.6.2pl4. * Sat Apr 28 2001 Pekka Savola - update to 0.6.2pl3. * Wed Apr 11 2001 Pekka Savola - update to 0.6.2pl2. * Wed Apr 4 2001 Pekka Savola - update to 0.62pl1. Bye bye patches! - Require: initscripts (should really be with a version providing IPv6) - clean up the init script, make condrestart work properly - Use a static /etc/rc.d/init.d; init.d/radvd required it anyway. * Sun Apr 1 2001 Pekka Savola - add patch to chroot (doesn't work well yet, as /proc is used directly) - clean up droproot patch, drop the rights earlier; require user-writable pidfile directory - set up the pidfile directory at compile time. * Sat Mar 31 2001 Pekka Savola - add select/kill signals patch from Nathan Lutchansky . - add address syntax checked fix from Marko Myllynen . - add patch to check the pid file before fork. - add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice default one. - add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid. - fix initscript NETWORKING_IPV6 check. * Sun Mar 18 2001 Pekka Savola - add droproot patch, change to nobody by default (should use radvd:radvd or the like, really). * Mon Mar 5 2001 Tim Powers - applied patch supplied by Pekka Savola in #30508 - made changes to initscript as per Pekka's suggestions * Thu Feb 15 2001 Tim Powers - needed -D_GNU_SOURCE to build properly * Tue Feb 6 2001 Tim Powers - use %configure and %makeinstall, just glob the manpages, cleans things up - fixed initscript so that it can be internationalized in the future * Fri Feb 2 2001 Pekka Savola - Create a single package(source) for glibc21 and glibc22 (automatic Requires can handle this just fine). - use %{_mandir} and friends - add more flesh to %doc - streamline %config file %attrs - streamline init.d file a bit: * add a default chkconfig: (default to disable for security etc. reasons; also, the default config isn't generic enough..) * add reload/condrestart * minor tweaks * missing: localization support (initscripts-5.60) - use %initdir macro * Thu Feb 1 2001 Lars Fenneberg - updated to new release 0.6.2 * Thu Feb 1 2001 Marko Myllynen - initial version, radvd version 0.6.1 ae1847f087192da649ad90ff5d484e95 SRPMS/radvd-0.7.3-1_FC3.src.rpm 345449ba4cf8dfba84eae22b5d1f9911 x86_64/radvd-0.7.3-1_FC3.x86_64.rpm 90ffdb019516a0be1f1467babdfb927b x86_64/debug/radvd-debuginfo-0.7.3-1_FC3.x86_64.rpm 096cccff8319777bb5b0f8093990f8a3 i386/radvd-0.7.3-1_FC3.i386.rpm 80263573365f5d976744c46761647bb2 i386/debug/radvd-debuginfo-0.7.3-1_FC3.i386.rpm This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. fedora-announce-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-announce-list
Change Log
References